Nuts
Cap Nuts (Dome and Acorn Nuts) Manufacturer, Wholesaler, Supplier & Exporter
Cap Nuts (Dome and Acorn Nuts) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our cap nuts (dome and acorn nuts) are made to DIN 1587, DIN 917, DIN 986 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A cap nut has a closed domed end that covers the protruding thread of a bolt, so there is no sharp end to catch on clothing and no exposed thread to rust. They are used in furniture, vehicles, machine guards and anywhere the finish matters. Our partner factories make cap nuts to DIN 1587, DIN 917 and DIN 986 in steel, stainless steel and brass.
A cap nut does two jobs at once: it clamps like a normal nut and it hides the end of the bolt. The dome protects people from the sharp thread end, protects the thread from dirt and rain, and gives the joint a finished look, which is why it is used on anything that is seen or touched.
The key limit is that the dome is closed. The bolt cannot pass through, so the bolt length must be right, and the nut engages less thread than a standard nut of the same height. For this reason, DIN 1587 high cap nuts are the choice for loaded joints, and the low DIN 917 version is for cover only.
Finish drives the price. Chrome-plated cap nuts are used where the look matters, stainless steel where the part is outdoors, and zinc where cost is the main point. We confirm the finish and, for chrome, the plating thickness before production.

Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
400,000-800,000 pcs
Full container (20ft)
800,000-1.6 million pcs
A standard 20ft container (~20 tons) holds approximately 800,000-1,600,000 pieces of cap nuts in common sizes (M8-M10). Exact quantity depends on size and type and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Cap Nuts (Dome and Acorn Nuts): photos by size and detail



Specifications
Standards
DIN 1587 (hexagon domed cap nuts, high type), DIN 917 (low type), DIN 986 (with nylon insert), ISO-based thread tolerances.
Size range
M4 to M24 in metric; #8 to 3/4" in imperial.
Types
High and low domed, with or without a nylon locking ring, blind or through-hole.
Finish
Zinc plated, chrome plated for visible parts, nickel, black oxide, and stainless steel A2 / A4 or brass.
Applications
Furniture and fittings
Covering bolt ends on visible joints.
Vehicles and trailers
Covering studs on wheels, number plates and bodywork.
Machine guards
Safe ends on bolts that stick out into walkways.
Playground and public equipment
Smooth, snag-free bolt ends.
Materials Available
Steel
Corrosion-resistant
Decorative
Every batch can be released against DIN 1587, DIN 917 or DIN 986, including dome height, thread depth and plating thickness, with a go and no-go gauge check, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the cap nuts (dome and acorn nuts), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The domed blank is cold-formed, tapped, then plated or polished; the dome height and the thread depth are checked in process.
- 3
Quality inspection
Batch sampling for dome height, thread gauge, finish and, for chrome, adhesion, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of cap nuts (dome and acorn nuts), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of cap nuts (dome and acorn nuts) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Wheel and trailer studs
Dome nuts that cover the stud ends on trailers and wheels.
Chair and table bases
Chrome acorn nuts on furniture frames.
Guard rails and handrails
Smooth bolt ends where people pass.
Number plates and signs
Stainless acorn nuts that do not rust or catch.
Common Mistakes Buyers Make
A bolt that is too long
The bolt bottoms inside the dome and the nut never clamps the part.
Low-type nut on a loaded joint
The thin DIN 917 nut engages little thread and can strip.
Chrome on plain steel outdoors
The plating flakes in the weather and the nut rusts; use stainless for exposed parts.
Mixing nylon-insert caps with hot parts
The nylon ring softens at high temperature; use an all-metal nut.
Glossary of Terms
- Dome (acorn)
- The closed, rounded end of the nut that covers the bolt thread.
- DIN 1587
- The German standard for high-type hexagon domed cap nuts.
- DIN 917
- The standard for low-type cap nuts, used mainly as a cover.
- Blind nut
- A nut with a closed end, so that a bolt cannot pass through it.
- Thread engagement
- The length of thread of the bolt that is inside the nut.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Cap Nuts (Dome and Acorn Nuts) To
All countries and cities for Cap Nuts (Dome and Acorn Nuts) →Frequently Asked Questions
Related Products
Competitive export pricing
The best price on cap nuts (dome and acorn nuts) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for cap nuts (dome and acorn nuts) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Cap nuts are bought in the hundreds of thousands, so volume pricing starts early, and dome height, plating, material and nylon insert can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
About us
Trusted Cap Nuts (Dome and Acorn Nuts) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies cap nuts (dome and acorn nuts) from India, with quality checks, export packing and complete shipping documents.
Our cap nuts (dome and acorn nuts) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for cap nuts (dome and acorn nuts) and for the other nuts you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing cap nuts (dome and acorn nuts) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply cap nuts (dome and acorn nuts) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order Cap Nuts (Dome and Acorn Nuts)?
Send your quantities, grade, standard, and destination port for a quote.

