Nuts
Castle Nuts (Castellated Nuts) Manufacturer, Wholesaler, Supplier & Exporter
Castle Nuts (Castellated Nuts) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our castle nuts (castellated nuts) are made to DIN 935, DIN 937, ASME B18.2.2, ISO 7035 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A castle nut has six slots cut across its top, like a castle wall, so that a cotter pin can be pushed through a hole in the bolt and through the slots to stop the nut turning. It is the classic locking nut for axles, steering joints and suspension parts. Our partner factories make castle nuts to DIN 935 and DIN 937 in steel and stainless steel, and we export them with matching cotter pins.
A castle nut is a mechanical lock, not a friction one. Where a nyloc nut depends on a plastic ring and a spring washer on friction, the castle nut and cotter pin make a positive stop: if the nut ever tries to turn, the pin is in the way. For parts whose failure is dangerous, such as steering and wheel bearings, that certainty is why the design survives.
The system needs three parts to be matched: a castle nut, a bolt or stud with a cross hole drilled at the right place, and a cotter pin of the right diameter. The nut slot width, the pin size and the hole position are linked by standards, and an order for the nut alone is incomplete.
Buyers in the automotive and agricultural trades usually order castle nuts with their cotter pins by the thousand. We supply both from the same factories, check slot widths against the pin sizes, and pack them by size so that the matching pair can be found quickly at the workshop.

Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
275,000-700,000 pcs
Full container (20ft)
550,000-1.4 million pcs
A standard 20ft container (~20 tons) holds approximately 550,000-1,400,000 pieces of castle nuts in common sizes (M12-M16). Exact quantity depends on size and class and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Castle Nuts (Castellated Nuts): photos by size and detail



Specifications
Standards
DIN 935 (hexagon slotted and castle nuts), DIN 937 (thin castle nuts), ASME B18.2.2 (slotted nuts), ISO 7035.
Size range
M6 to M42 in metric; 1/4" to 1 1/2" in imperial.
Property class
Classes 6, 8 and 10; A2-70 / A4-70 stainless steel.
Finish
Plain, zinc plated, black oxide, phosphate, and cadmium-free coatings on request.
Applications
Axles and wheel hubs
Retaining bearings and hubs with a cotter pin.
Steering and suspension joints
Ball joints and tie-rod ends on vehicles.
Agricultural machinery
Pins and linkages on implements that vibrate.
Rail and heavy equipment
Retaining nuts on shafts and pins where loosening is dangerous.
Materials Available
Steel
Corrosion-resistant
Finish
Every batch can be released against DIN 935 or DIN 937, including slot width and depth, hardness and a proof-load test on a sample, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the castle nuts (castellated nuts), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The nut is hot- or cold-forged, tapped, the six slots are milled and the nut is heat treated for its class; slot width and alignment are checked in process.
- 3
Quality inspection
Batch sampling for slot dimensions, hardness, thread gauge and proof load, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of castle nuts (castellated nuts), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of castle nuts (castellated nuts) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Wheel hub nuts
Retaining the bearing preload on a vehicle hub with a cotter pin.
Tie-rod ends
Castle nuts on ball-joint studs in steering linkages.
Implement pivots
Retaining pins and shafts on farm machinery.
Rail rolling stock
Positive locking on shafts and pins.
Common Mistakes Buyers Make
Loosening the nut to align the slot
The joint loses its preload; turn the nut forward, or use a thinner washer to change the alignment.
Reusing the cotter pin
A used pin is work-hardened and can break; always fit a new one.
Wrong pin size for the slot
A loose pin can wear and work out; match the pin diameter to the slot and the bolt hole.
Using the thin nut on a heavy load
DIN 937 engages less thread and can strip; use DIN 935 for loaded joints.
Glossary of Terms
- Castle (castellated) nut
- A hex nut with slots across the top that line up with a hole in the bolt for a cotter pin.
- Cotter pin
- A split metal pin that passes through the bolt and slots, and has its ends bent over.
- DIN 935
- The German standard for hexagon slotted and castle nuts.
- Slot
- One of the six cuts across the top of the nut.
- Positive locking
- A lock that stops the nut turning by shape, not by friction.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Castle Nuts (Castellated Nuts) To
All countries and cities for Castle Nuts (Castellated Nuts) →Frequently Asked Questions
Related Products
Competitive export pricing
The best price on castle nuts (castellated nuts) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for castle nuts (castellated nuts) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Castle nuts ship with matching cotter pins from the same factories, which lowers the price of the pair, and class, slot size and finish can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
About us
Trusted Castle Nuts (Castellated Nuts) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies castle nuts (castellated nuts) from India, with quality checks, export packing and complete shipping documents.
Our castle nuts (castellated nuts) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for castle nuts (castellated nuts) and for the other nuts you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing castle nuts (castellated nuts) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply castle nuts (castellated nuts) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order Castle Nuts (Castellated Nuts)?
Send your quantities, grade, standard, and destination port for a quote.

