Pins
Spring Pins (Roll Pins) Manufacturer, Wholesaler, Supplier & Exporter
Spring Pins (Roll Pins) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our spring pins (roll pins) are made to ISO 8752, DIN 1481, ISO 13337, DIN 7346 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A spring pin is a hollow, rolled pin that is pressed into a hole slightly smaller than itself. It springs back against the walls and holds by friction, so it needs no thread and no cotter. They are used as hinge pins, dowels, stops and shaft pins. Our partner factories make slotted and coiled spring pins to ISO 8752, ISO 8750 and DIN 1481 in spring steel and stainless steel.
A spring pin is a part that replaces a drilled-and-reamed hole and a precision dowel. Because it compresses as it enters the hole, the hole can be drilled with an ordinary tolerance, which saves a machining step and is the reason these pins are so common in mass production.
The choice of type depends on the load. A slotted pin is the standard form and the heavy-duty ISO 8752 version carries the highest shear. A coiled pin, with its spiral wall, is flexible and takes shock without cracking, and a light-duty pin is used in thin material where a heavy pin would split the wall.
Orders should give the standard, the diameter and the material. Stainless spring pins are specified where rust is a risk, but the stainless grade matters, since AISI 420 is hard and AISI 301 is springy. We confirm hardness and double-shear values with each lot, as they are the figures a designer needs.

Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
1.5-5 million pcs
Full container (20ft)
3-10 million pcs
A standard 20ft container (~20 tons) typically holds 3,000,000-10,000,000 pieces of spring pins in common sizes (4-6 mm). Exact quantity depends on diameter and length and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Spring Pins (Roll Pins): photos by size and detail



Specifications
Standards
ISO 8752 / DIN 1481 (slotted, heavy duty), ISO 13337 / DIN 7346 (slotted, light duty), ISO 8750 (coiled, standard duty).
Size range
1 mm to 20 mm nominal diameter, lengths 4 mm to 200 mm.
Types
Slotted pins with chamfered ends, coiled (spiral) pins for repeated loads, and light-duty versions for thin walls.
Finish
Plain with oil, zinc plated, phosphate, and stainless steel (AISI 420 or 301 / 1.4310).
Applications
Hinges and linkages
Pivot pins in levers, hinges and small mechanisms.
Locating and dowelling
Positioning parts that are bolted together.
Shaft and gear pins
Securing gears and collars on shafts.
Automotive and appliances
High-volume pins pressed into assemblies on production lines.
Materials Available
Spring steel
Stainless
Finish
Every batch can be released against ISO 8752, ISO 8750 or DIN 1481, including diameter before and after fitting, hardness and a double-shear load test, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the spring pins (roll pins), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
Spring steel strip is cut and rolled into a tube, the ends are chamfered, and the pins are heat treated and finished; the pin diameter and hardness are checked in process.
- 3
Quality inspection
Batch sampling for free diameter, length, hardness and shear load, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of spring pins (roll pins), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of spring pins (roll pins) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Hinge and lever pivots
Pins pressed through lugs to form a pivot.
Gear and collar fixing
A pin through a hub and shaft transfers torque.
Locating pins
Alignment pins between two housings.
Appliance assemblies
Small pins pressed in by machines at high volume.
Common Mistakes Buyers Make
Hole too large
The pin loses its grip and works loose; keep the hole within the specified tolerance.
Slot facing the load
The weakest part of the pin takes the load and can open up; turn the slot away from the shear direction.
Reusing a removed pin
The pin has lost spring force; fit a new one.
Light-duty pin on a heavy load
The thin wall shears or opens; use the heavy-duty type for load-bearing joints.
Glossary of Terms
- Slotted spring pin
- A pin made from a rolled strip with a gap along its length.
- Coiled spring pin
- A pin made from strip rolled into a spiral of about two and a quarter turns.
- Double shear
- A load that acts at two planes of the pin at once, as in a clevis joint.
- ISO 8752
- The international standard for heavy-duty slotted spring pins.
- Chamfer
- The tapered end that helps the pin enter the hole without catching.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Spring Pins (Roll Pins) To
All countries and cities for Spring Pins (Roll Pins) →Frequently Asked Questions
Related Products
Competitive export pricing
The best price on spring pins (roll pins) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for spring pins (roll pins) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Spring pins are counted in millions per container, so even mixed diameters carry very low unit prices, and type, hardness, material and length can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
About us
Trusted Spring Pins (Roll Pins) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies spring pins (roll pins) from India, with quality checks, export packing and complete shipping documents.
Our spring pins (roll pins) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for spring pins (roll pins) and for the other pins you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing spring pins (roll pins) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply spring pins (roll pins) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order Spring Pins (Roll Pins)?
Send your quantities, grade, standard, and destination port for a quote.

