Bolts
T-Bolts (T-Head and Hammer Head Bolts) Manufacturer, Wholesaler, Supplier & Exporter
T-Bolts (T-Head and Hammer Head Bolts) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our t-bolts (t-head and hammer head bolts) are made to DIN 186, DIN 188, DIN 261 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 5,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A T-bolt has a rectangular or hammer-shaped head that slides into a channel or T-slot and locks there when the nut is turned. That lets a fixture be placed anywhere along a rail without access to the back. Our partner factories make T-bolts to DIN 186, DIN 188 and DIN 261 in steel and stainless steel, and we export them for rail, solar and machine-tool work.
A T-bolt answers a simple installation problem: you cannot get a hand behind a rail, but you still need a bolt that does not spin. The head locks into the channel by shape, the nut is tightened from the open side, and the fixture can be moved by loosening the nut and sliding the bolt along the slot.
The head is where the standards differ. DIN 186 has a rectangular head with a square neck, DIN 188 adds nips that bite into the slot to stop rotation, and DIN 261 is made to fit machine-tool T-slots. A strut or solar rail has its own slot profile, so the order should give the profile, not just the thread size.
In solar mounting, T-bolts are bought by the hundred thousand with stainless nuts and washers. Material and the surface finish matter because the bolts sit on a roof for 25 years, and we supply stainless steel A2 and A4 bolts with the matching nuts, with certificates, in cartons counted to the buyer's kit size.

Minimum order and container quantity
Minimum order
5,000 pcs
or half / full container, as per your requirement
Half container (20ft)
100,000-175,000 pcs
Full container (20ft)
200,000-350,000 pcs
A standard 20ft container (~20 tons) holds approximately 200,000-350,000 pieces of T-bolts in common sizes (M10-M12). Exact quantity depends on size and length and is confirmed at quote time.
The minimum order is 5,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
T-Bolts (T-Head and Hammer Head Bolts): photos by size and detail



Specifications
Standards
DIN 186 (square neck T-head), DIN 188 (T-head with double nip), DIN 261 (T-head bolts for T-slots), and strut-channel forms to the drawing.
Size range
M6 to M30 in metric; 1/4" to 1 1/4" in imperial; lengths 20 mm to 300 mm.
Property class
4.6, 5.6 and 8.8 steel; A2-70 and A4-70 stainless steel.
Finish
Plain, zinc plated, hot-dip galvanized, black oxide and stainless steel.
Applications
Solar panel mounting
Clamping panels and brackets into aluminium rail slots.
Machine tools and fixtures
Locating clamps in the T-slots of tables.
Strut and rail systems
Fixing pipes, trays and equipment to channel.
Formwork and timber
Adjustable fixings where the square neck stops rotation.
Materials Available
Steel
Corrosion-resistant
Coatings
Every batch can be released against DIN 186, DIN 188 or DIN 261, including head and neck dimensions, thread and property class, with a tensile test on a sample, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the t-bolts (t-head and hammer head bolts), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The head and square neck are cold- or hot-forged, the thread is rolled, and the bolts are heat treated for the class and plated; head width and neck size are checked in process.
- 3
Quality inspection
Batch sampling for head and neck dimensions, thread gauge, property class and finish, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of t-bolts (t-head and hammer head bolts), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of t-bolts (t-head and hammer head bolts) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Solar rail clamps
Stainless T-bolts holding mid and end clamps in aluminium rails.
Machine table fixtures
High-tensile T-bolts in the T-slots of milling tables.
Strut channel supports
T-bolts fixing pipe clamps and trays to channel.
Adjustable timber fixings
Square-neck bolts that do not rotate in a slot or hole.
Common Mistakes Buyers Make
Ordering by thread size only
The head width and height must fit the slot; the wrong head slips or jams.
Plain steel on a roof
The bolts corrode and stain the rail; specify stainless or galvanized.
Over-tightening a nipped head
The nips can score soft aluminium; follow the torque for the rail.
Mixing metals in the rail
Stainless bolts in an aluminium rail need the right washers and conditions to avoid galvanic corrosion.
Glossary of Terms
- T-head
- A rectangular head that slides into a channel and locks there.
- Square neck
- The square section under the head that stops the bolt turning.
- T-slot
- A slot, usually in a machine table or rail, with a wider cavity behind a narrow opening.
- DIN 261
- The German standard for T-head bolts that fit machine-tool T-slots.
- Hammer head
- A common name for a T-head bolt with a hammer-shaped head.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export T-Bolts (T-Head and Hammer Head Bolts) To
All countries and cities for T-Bolts (T-Head and Hammer Head Bolts) →Frequently Asked Questions
Competitive export pricing
The best price on t-bolts (t-head and hammer head bolts) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for t-bolts (t-head and hammer head bolts) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. T-bolts are priced on length and head size, and a mixed container of lengths lowers the cost, with head profile, material and finish customized to your rail. Minimum order 5,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
5,000 pcs
Minimum order, or half / full container
About us
Trusted T-Bolts (T-Head and Hammer Head Bolts) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies t-bolts (t-head and hammer head bolts) from India, with quality checks, export packing and complete shipping documents.
Our t-bolts (t-head and hammer head bolts) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for t-bolts (t-head and hammer head bolts) and for the other bolts you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing t-bolts (t-head and hammer head bolts) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply t-bolts (t-head and hammer head bolts) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order T-Bolts (T-Head and Hammer Head Bolts)?
Send your quantities, grade, standard, and destination port for a quote.

