Global Fasteners ExportsHurain Engitech & Trade

Nuts

Weld Nuts Manufacturer, Wholesaler, Supplier & Exporter

Weld Nuts manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our weld nuts are made to DIN 929, DIN 928 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

A weld nut is welded to a plate, panel or bracket, so a bolt can be screwed into a threaded hole that is permanently part of the part. They are used in huge numbers in car bodies, chassis frames and sheet-metal enclosures. Our partner factories make weld nuts to DIN 929 and DIN 928 in low-carbon weldable steel with projections for resistance welding.

A weld nut is a threaded hole you can attach to something that has no room for a nut on the back. It is joined to the part by resistance welding: the projections on the nut face concentrate the current, melt, and fuse the nut to the plate in a fraction of a second, which is why the process suits a production line.

Everything about the nut is chosen for that process. The steel must be low in carbon so that the weld is ductile, the projections must be even in height so that all of them make contact together, and the thread must be clear of oil and spatter so that a bolt turns in freely afterwards.

Buyers who run automated welding lines care about tolerances more than anything. A batch with varying projection height or across-flats jams the feeder and gives weak welds. We specify these tolerances in the order and check them on every batch, and we protect the thread with a light oil for shipping.

Weld Nuts manufacturer, supplier and exporter from India: studio product photo (representative photo)

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

1-2 million pcs

Full container (20ft)

2-4 million pcs

A standard 20ft container (~20 tons) holds approximately 2,000,000-4,000,000 pieces of weld nuts in common sizes (M8-M10). Exact quantity depends on size and type and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Weld Nuts: photos by size and detail

Weld Nuts wholesaler and exporter: range of sizes laid out side by side (representative photo)
Buy weld nuts in bulk from India: close-up detail (representative photo)
Weld Nuts packed for export: assorted sizes in one lot (representative photo)

Specifications

Standards

DIN 929 (hexagon weld nuts), DIN 928 (square weld nuts), and flange and round weld nut forms to the buyer's drawing.

Size range

M3 to M16 in metric; #6 to 5/8" in imperial.

Projections

Three or four projections for resistance welding, or a ring projection on round and flange types.

Material and finish

Low-carbon steel (weldable), plain with a light oil, or zinc plated for welding after plating; stainless steel on request.

Applications

Car bodies and chassis

Threaded points welded into pressed steel parts.

Sheet-metal enclosures

Mounting points in cabinets and electrical boxes.

Agricultural and construction equipment

Threaded points in welded steel frames.

Shelving and racking

Welded nuts that take bolted accessories.

Materials Available

Weldable steel

Low-carbon steel, 0.20% carbon maximumClass 4, 5 and 6 nuts

Finish

Plain with anti-rust oilZinc plated (check weld settings)

Special

Stainless steel for welding to stainless partsNuts with a pilot or locating spigot

Every batch can be released against DIN 929 or DIN 928, including projection height, thread and a weld-strength push-out test on a sample, with mill test certificates and dimensional inspection reports supplied on request.

How We Supply & Export This Product

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the weld nuts, and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    Low-carbon steel bar is cold-formed with its projections, tapped to the class and tolerance, and oiled or plated; the projections and the thread are checked in process.

  3. 3

    Quality inspection

    Batch sampling for projection height, across-flats, thread gauge, and a push-out or torque test on welded samples, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of weld nuts, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

Export Track Record

Shipped as full container loads (FCL) and LCL pallets of weld nuts to distributors, OEM buyers and project contractors across multiple continents.

Real-World Use Cases

Body-in-white parts

Nuts welded into car panels to receive trim and brackets.

Chassis cross members

Welded threaded points for suspension and engine mounts.

Electrical cabinets

Earthing and mounting points welded to the enclosure.

Steel furniture and racking

Welded nuts that take adjustable feet and fittings.

Common Mistakes Buyers Make

High-carbon or hardened nuts

The weld is brittle and the nut can pop off under torque; specify low-carbon weldable steel.

Uneven projections

Only some projections melt and the weld is weak; check projection height by batch.

Weld spatter in the thread

The bolt will not enter; use a nut with a pilot or protect the thread.

Welding plated nuts with plain-nut settings

Zinc burns off and spatters; adjust the current and clean the electrodes.

Glossary of Terms

Projection welding
A resistance welding process where the current is focused on small raised points on one part.
DIN 929
The German standard for hexagon weld nuts.
DIN 928
The German standard for square weld nuts.
Pilot (spigot)
A small collar on some weld nuts that locates it in a hole in the plate.
Push-out test
A test that measures the force needed to push a welded nut off the plate.

Quality Inspection We Perform

Dimensional inspection

Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.

Material verification

Grade and material composition confirmed against the order specification, with mill test certificates on request.

Mechanical testing

Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.

Finish & coating check

Plating thickness, galvanizing coverage, or passivation quality inspected before packing.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Countries We Export Weld Nuts To

All countries and cities for Weld Nuts →
AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company: its weld nuts are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Competitive export pricing

The best price on weld nuts for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for weld nuts for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Weld nuts are produced on high-speed lines, so large production lots carry low unit prices, and projections, flange, plating and class can be customized to your welding line. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

About us

Trusted Weld Nuts manufacturer, supplier and exporter from India

Global Fasteners Exports is a trading and export company that supplies weld nuts from India, with quality checks, export packing and complete shipping documents.

Our weld nuts are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for weld nuts and for the other nuts you need, one inspection and one set of export documents.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in India

Our vision is to make sourcing weld nuts simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in India

Our mission is to supply weld nuts at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.

Ready to order Weld Nuts?

Send your quantities, grade, standard, and destination port for a quote.