Africa · en-mr
Self-Tapping Screws Manufacturer, Wholesaler, Supplier & Exporter to Mauritania
Self-tapping and self-drilling screws cut their own thread into sheet metal, plastic, or pre-drilled holes, eliminating the need for a separate nut. We manufacture and export these in pan, countersunk, and hex-washer head styles for roofing, cladding, and general assembly. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Mauritania with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
Mauritania at a glance
- Region
- Africa
- Population
- 4.7 million
- Local currency
- Mauritanian ouguiya (MRU)
- Languages
- Arabic, French
- Time zone
- Africa/Nouakchott (UTC+00:00), 5 h 30 min behind India
- Indicative sea transit from India
- about 12–35 days depending on coast
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
The distinction between self-tapping and self-drilling trips up more first-time buyers than almost any other spec in this catalog. Self-tapping screws form threads into a pre-existing hole and rely on the installer (or a pre-drilling step) to get that hole right; self-drilling screws carry their own drill-point tip and skip the pre-drilling step entirely, at the cost of a slightly more expensive part. Ordering the wrong one for the job either wastes the drill-point cost or leaves installers drilling holes that should have been unnecessary.
About Self-Tapping Screws
Self-tapping and self-drilling screws to DIN 7981, DIN 7982, ISO 7049, and ISO 15480 for sheet metal, roofing, and construction — manufactured and exported worldwide.
View full product details →Shipping & Trade Notes for Mauritania
- • Fasteners are typically classified under HS Chapter 73 for import into Mauritania — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) typically holds several million pieces of self-tapping screws in common sizes. Exact quantity depends on length, diameter, and head style, and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Mauritania Buyers Use Self-Tapping Screws
Metal roofing and cladding
Hex washer head screws with bonded EPDM washers for weatherproof sheet fastening.
HVAC ductwork assembly
Fast, tool-free fastening of sheet metal ducting without pre-drilling.
Light-gauge steel framing
Self-drilling screws for stud-to-track connections in drywall and framing systems.
Common Mistakes Buyers Make
Using self-tapping screws without pre-drilling
Without a pilot hole, standard self-tapping screws can strip the surrounding material or snap on installation.
Choosing the wrong drill-point size for the material gauge
An undersized drill point struggles to penetrate thicker metal; an oversized one drills too fast and reduces thread engagement in thin sheet.
Skipping the sealing washer on exterior roofing
Standard screws without a bonded washer allow water ingress at every fastening point on a roof.
Key Terms
- Self-drilling (Tek) screw
- A screw with an integrated drill-point tip that drills and threads its own hole in one operation.
- Thread-forming vs. thread-cutting
- Thread-forming screws displace material to create a thread; thread-cutting screws remove material like a tap — thread-forming is stronger but requires more driving torque.
- Drill point number
- A rating (e.g. #2, #3, #5) indicating how much material thickness a self-drilling screw's tip can penetrate.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Mauritania
Request a Self-Tapping Screws quote for Mauritania
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.