Nuts
Coupling Nuts (Long Nuts) Manufacturer, Wholesaler, Supplier & Exporter
Coupling Nuts (Long Nuts) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our coupling nuts (long nuts) are made to DIN 6334 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 5,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A coupling nut is a long hexagon nut, three diameters tall, that joins two lengths of threaded rod end to end. It lets a long rod be built up on site and is the standard fitting in hanger systems, formwork ties and anchor extensions. Our partner factories make them to DIN 6334 in steel and stainless steel, and we export them with the rod and studs from the same catalogue.
Threaded rod is sold in fixed lengths, and a coupling nut is how a site gets any length it needs. Because the nut is long, the two rods get enough thread engagement to carry tension, and because it is a standard hex shape, it is turned with ordinary spanners.
The quality that matters is the thread in the middle. The two rods must meet inside the nut, and the threads of both halves must align without a step, otherwise one rod carries more load than the other. This is why the tapping is done in one pass through the bar and checked with a gauge from both ends.
For hanger systems and tie rods, the nut class must match the rod. We supply coupling nuts in class 4 to class 10 and stainless steel, matched to the rod in the same order, with the finish and the thread allowance agreed together when the part is hot-dip galvanized.

Minimum order and container quantity
Minimum order
5,000 pcs
or half / full container, as per your requirement
Half container (20ft)
110,000-200,000 pcs
Full container (20ft)
220,000-400,000 pcs
A standard 20ft container (~20 tons) holds approximately 220,000-400,000 pieces of coupling nuts in common sizes (M10-M12). Exact quantity depends on size and length and is confirmed at quote time.
The minimum order is 5,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Coupling Nuts (Long Nuts): photos by size and detail



Specifications
Standards
DIN 6334 (hexagon nuts with a height of 3 x d), ISO-based thread tolerances, and class 4, 6, 8 or 10 steel.
Size range
M6 to M30 in metric; 1/4" to 1 1/4" in imperial.
Form
Hexagon bar with a through-tapped bore, plain or with an inspection hole; round and standard hex versions.
Finish
Plain, zinc plated, hot-dip galvanized, and stainless steel A2 / A4.
Applications
Threaded-rod hangers
Extending drop rods for pipes, ducts and cable trays.
Formwork and tie systems
Joining tie rods in concrete shuttering.
Anchor extensions
Lengthening anchor bolts and rods in structural work.
Machinery and rigs
Joining studs to build adjustable-length supports.
Materials Available
Steel
Corrosion-resistant
Coatings
Every batch can be released against DIN 6334, including length, across-flats and thread tolerance, with a proof-load check on a sample for class 8 and above, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the coupling nuts (long nuts), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
Hexagon bar is cut to length and tapped through, then plated or galvanized with the thread allowed for in the tapping; length and thread are checked in process.
- 3
Quality inspection
Batch sampling for length, across-flats, thread gauge and, where specified, a proof-load test, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of coupling nuts (long nuts), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of coupling nuts (long nuts) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Pipe and duct hangers
Building up drop rods to reach the ceiling in mechanical installations.
Concrete tie rods
Joining tie rods that hold formwork together.
Anchor-bolt extensions
Lengthening a short anchor rod to reach the base plate.
Adjustable supports
A coupling nut turned to take up length between two rod ends.
Common Mistakes Buyers Make
Rods that do not meet in the middle
A gap between the rods leaves the load on a few threads and the joint stretches.
Mixing grades
A low-grade nut on high-tensile rod limits the strength of the joint.
Using the nut on a fatigue load without checking
The thread run-out at the ends is a stress point; check the design load and the standard.
Galvanizing without a thread allowance
The zinc fills the thread and the rod will not enter; the nut must be tapped oversize before galvanizing.
Glossary of Terms
- Coupling nut
- A long nut used to join two threaded rods end to end.
- DIN 6334
- The German standard for hexagon nuts with a height of three times the thread diameter.
- Thread engagement
- The length of rod thread inside the nut; more engagement means more tension capacity.
- Proof load
- The load a nut must carry without permanent deformation, set by its property class.
- Inspection hole
- A small cross hole in some coupling nuts that shows when the rod has reached the middle.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Coupling Nuts (Long Nuts) To
All countries and cities for Coupling Nuts (Long Nuts) →Frequently Asked Questions
Related Products
Competitive export pricing
The best price on coupling nuts (long nuts) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for coupling nuts (long nuts) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Coupling nuts are priced on bar weight, so ordering them with the threaded rod in one shipment lowers the cost, and length, class, coating and tapping can be customized. Minimum order 5,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
5,000 pcs
Minimum order, or half / full container
About us
Trusted Coupling Nuts (Long Nuts) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies coupling nuts (long nuts) from India, with quality checks, export packing and complete shipping documents.
Our coupling nuts (long nuts) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for coupling nuts (long nuts) and for the other nuts you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing coupling nuts (long nuts) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply coupling nuts (long nuts) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order Coupling Nuts (Long Nuts)?
Send your quantities, grade, standard, and destination port for a quote.

