Global Fasteners ExportsHurain Engitech & Trade

Screws

Drywall Screws Manufacturer, Wholesaler, Supplier & Exporter

Drywall Screws manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our drywall screws are made to ASTM C1002, ASTM C954, DIN 18182-2 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

Drywall screws fix gypsum board and plasterboard to timber and light steel studs. They have a bugle head that sinks just below the paper face without tearing it, a hardened body and a thread cut for the stud they go into. Our partner factories make them to ASTM C1002 and DIN 18182-2 in coarse and fine thread, and we export them in bulk cartons and pallets.

A drywall screw is designed around one job: pull a sheet of gypsum board tight to a stud and stop just below the surface. The bugle head, the Phillips recess and the thread pitch all serve that purpose, and so does the hardness, which lets the point pierce a light steel stud without bending.

Hard steel has a cost. A drywall screw is brittle in shear compared with a wood screw, so it should never be used as a structural fixing. Buyers who ask for 'screws that can do everything' are usually better served by two products: drywall screws for boards and structural wood screws for framing.

For export, the points to specify are the thread (coarse or fine), the length, the finish for the destination climate and the packing. Fine-thread screws for steel studs are the dominant line in markets that build with metal framing, such as the Gulf, and coarse-thread screws lead where timber studs are used.

Drywall Screws manufacturer, supplier and exporter from India: studio product photo (representative photo)

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

about half of that

Full container (20ft)

several million pcs (depends on size)

Drywall screws are small and light, so a standard 20ft container (~20 tons) typically holds several million to over ten million pieces in common sizes (3.5 mm x 25-55 mm). Exact quantity depends on length and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Drywall Screws: photos by size and detail

Drywall Screws wholesaler and exporter: range of sizes laid out side by side (representative photo)
Buy drywall screws in bulk from India: close-up detail (representative photo)
Drywall Screws packed for export: assorted sizes in one lot (representative photo)

Specifications

Standards

ASTM C1002 (self-piercing, to light steel studs), ASTM C954 (steel studs up to heavier gauge), DIN 18182-2 (drywall screws).

Size range

3.5 mm and 3.9 mm diameters (#6 and #8) by 25 mm to 70 mm; longer lengths on request.

Thread and point

Coarse thread with a sharp point for timber studs; fine thread with a needle or self-drilling point for metal studs.

Finish

Black phosphate (standard), zinc plated, and coated grades for damp rooms; collated strips on request.

Applications

Interior partitions

Fixing gypsum board to timber and steel studs in walls.

Ceilings

Fixing ceiling boards to joists and metal furring channels.

Fit-out and renovation

Hotels, offices and apartments where large quantities of board are fixed quickly.

Cladding backing boards

Fixing cement and fibre boards to light steel frames.

Materials Available

Steel

Carbon steel, case hardenedLow-carbon steel for light grades

Corrosion-resistant

Zinc platedZinc-nickel and ceramic-type coatings for damp areas

Phosphate

Black phosphate with oil (standard)Grey phosphate

Every batch can be released against ASTM C1002 and DIN 18182-2, including head form, hardness, drive and thread, with a driving and torsion test on a sample, with mill test certificates and dimensional inspection reports supplied on request.

How We Supply & Export This Product

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the drywall screws, and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    Wire is cold-headed, a Phillips recess is formed, the thread is rolled and the screws are case hardened, then phosphated or plated; recess and thread depth are checked in process.

  3. 3

    Quality inspection

    Batch sampling for head form, recess depth, hardness, thread, drive-in test and coating, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of drywall screws, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

Export Track Record

Shipped as full container loads (FCL) and LCL pallets of drywall screws to distributors, OEM buyers and project contractors across multiple continents.

Real-World Use Cases

Timber stud partitions

Coarse-thread screws fixing board to timber studs at standard spacing.

Steel stud partitions

Fine-thread, sharp-point screws fixing board to light-gauge steel studs.

Suspended ceilings

Board fixed to metal furring channels at close centres.

Damp room fit-out

Coated screws for moisture-resistant board in kitchens and bathrooms.

Common Mistakes Buyers Make

Choosing the wrong thread for the stud

A coarse thread in metal or a fine thread in timber gives a weak, loose fixing.

Over-driving

The head tears the paper and the board no longer holds; use a depth-setting screw gun.

Using them as structural screws

The hardened, brittle shank breaks under shear; use a structural screw instead.

Ignoring the finish for humid sites

Black phosphate rusts quickly in damp or coastal buildings; specify a zinc or coated grade.

Glossary of Terms

Bugle head
A head with a curved underside that sits flush with, or just below, the board surface.
Phillips #2
The recess size used on most drywall screws and screw-gun bits.
Collated screws
Screws joined in a plastic strip for fast driving with an auto-feed screw gun.
Phosphate coating
A thin, dark conversion coating that gives light rust protection and a good key for filler.
ASTM C1002
The US standard for self-piercing screws used to fix gypsum board to light steel studs.

Quality Inspection We Perform

Dimensional inspection

Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.

Material verification

Grade and material composition confirmed against the order specification, with mill test certificates on request.

Mechanical testing

Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.

Finish & coating check

Plating thickness, galvanizing coverage, or passivation quality inspected before packing.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Countries We Export Drywall Screws To

All countries and cities for Drywall Screws →
AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company: its drywall screws are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Competitive export pricing

The best price on drywall screws for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for drywall screws for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Drywall screws ship in the millions, so wholesale rates apply from the first order, and thread, length, point, finish and collated strips can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

About us

Trusted Drywall Screws manufacturer, supplier and exporter from India

Global Fasteners Exports is a trading and export company that supplies drywall screws from India, with quality checks, export packing and complete shipping documents.

Our drywall screws are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for drywall screws and for the other screws you need, one inspection and one set of export documents.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in India

Our vision is to make sourcing drywall screws simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in India

Our mission is to supply drywall screws at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.

Ready to order Drywall Screws?

Send your quantities, grade, standard, and destination port for a quote.