Global Fasteners ExportsHurain Engitech & Trade

Screws

Self-Drilling Screws (Tek Screws) Manufacturer, Wholesaler, Supplier & Exporter

Self-Drilling Screws (Tek Screws) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our self-drilling screws (tek screws) are made to DIN 7504, ISO 15480, ISO 15481 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

A self-drilling screw drills its own hole, taps the thread and fixes the part in one operation, which is why it is the standard fixing for metal roofing, cladding and steel-frame buildings. Our partner factories make them with drill points 1 to 5, hex washer, pan and wafer heads, and EPDM sealing washers, and we export them by the container.

A self-drilling screw replaces three steps, drilling, tapping and fastening, with one. The tip drills the hole, the flutes clear the swarf, and the thread then forms its own mating thread as the screw sinks in. The speed this saves on a large roof is the reason the type has become the default for steel sheeting.

The drill point is the specification most buyers miss. If the point is too small for the steel thickness, it burns out before the thread engages and the screw sits on the surface; too large a point on thin sheet leaves an oversize hole. The drilling capacity is a range printed against each point number, and it is measured on a defined steel strength.

Corrosion is the other decision. On a roof, the screw is the first part of the system to fail if its coating is thin, and a leaking screw can damage the whole sheet. Coastal and industrial buyers specify long-life coatings or stainless heads, and we confirm the coating and salt-spray hours before shipping.

Self-Drilling Screws (Tek Screws) manufacturer, supplier and exporter from India: studio product photo (representative photo)

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

750,000-1.5 million pcs

Full container (20ft)

1.5-3 million pcs

A standard 20ft container (~20 tons) typically holds 1,500,000-3,000,000 pieces of self-drilling screws in common sizes (4.8 mm x 25 mm to 5.5 mm x 38 mm). Exact quantity depends on length and washer type and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Self-Drilling Screws (Tek Screws): photos by size and detail

Self-Drilling Screws (Tek Screws) wholesaler and exporter: range of sizes laid out side by side (representative photo)
Buy self-drilling screws (tek screws) in bulk from India: close-up detail (representative photo)
Self-Drilling Screws (Tek Screws) packed for export: assorted sizes in one lot (representative photo)

Specifications

Standards

DIN 7504 (self-drilling tapping screws), ISO 15480 (hex washer head), ISO 15481 to 15483 (pan and other heads), SAE J78 (US).

Size range

3.5 mm to 6.3 mm diameter (#6 to #14) by 13 mm to 250 mm; lengths to suit panel and purlin thickness.

Drill point

Point numbers 1 to 5: the higher the number, the thicker the steel the screw can drill; the supplier's drilling-capacity table applies.

Finish

Zinc plated, corrosion-coated (long-life grades for roofing), and stainless steel caps for coastal sites; bonded EPDM washers.

Applications

Metal roofing and cladding

Fixing profiled steel and aluminium sheets to purlins and rails, with a sealing washer.

Light steel framing

Joining studs, tracks and brackets in steel-frame buildings.

HVAC and ducting

Fixing duct work, brackets and cable trays to thin steel.

Warehouse and shed building

High-volume fixing of sheeting and trims in industrial construction.

Materials Available

Steel

Case-hardened carbon steel (standard)

Corrosion-resistant

Stainless steel 410 or 304 body with a drill pointBi-metal screws with a stainless head and a hardened tip

Sealing

EPDM bonded washers (16 mm, 19 mm)Neoprene washers on request

Every batch can be released against DIN 7504 or ISO 15480, including point drilling capacity, hardness, thread and a salt-spray result on the coating, with mill test certificates and dimensional inspection reports supplied on request.

How We Supply & Export This Product

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the self-drilling screws (tek screws), and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    Wire is cold-headed, the drill point is formed to the required number, the thread is rolled and the screws are case hardened and coated; the point geometry is checked in process.

  3. 3

    Quality inspection

    Batch sampling for drilling test on sample steel, hardness, thread, head and washer fit, and coating thickness, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of self-drilling screws (tek screws), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

Export Track Record

Shipped as full container loads (FCL) and LCL pallets of self-drilling screws (tek screws) to distributors, OEM buyers and project contractors across multiple continents.

Real-World Use Cases

Roof sheet to purlin

Hex washer head with an EPDM washer driving through the sheet crest into a steel purlin.

Wall cladding

Pan or wafer head screws fixing cladding sheets and trims to rails.

Stud and track joints

Light drill-point screws joining steel studs to tracks in framing.

Duct and tray fixing

Short screws fixing HVAC ducts and cable trays to thin steel.

Common Mistakes Buyers Make

Wrong drill point for the steel

The point burns out before the thread engages, or the hole is oversize and the screw strips.

Crushing the sealing washer

Over-driving splits the EPDM and the fixing leaks; use a depth-limited driver.

Driving at too high a speed

The tip overheats and loses its temper; follow the recommended tool speed.

Plain zinc on a coastal roof

The screws rust within a season, staining the sheets and leaking at the fixing.

Glossary of Terms

Drill point
The fluted tip of the screw, numbered 1 to 5 by the steel thickness it can drill.
Drilling capacity
The range of total steel thickness a given point can drill through.
Hex washer head
A hexagon head with an integral flange, driven with a hex socket and sealing under a washer.
Tek screw
A common trade name for self-drilling screws.
Bi-metal screw
A screw with a stainless steel body and a hardened steel drill tip welded on.

Quality Inspection We Perform

Dimensional inspection

Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.

Material verification

Grade and material composition confirmed against the order specification, with mill test certificates on request.

Mechanical testing

Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.

Finish & coating check

Plating thickness, galvanizing coverage, or passivation quality inspected before packing.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Countries We Export Self-Drilling Screws (Tek Screws) To

All countries and cities for Self-Drilling Screws (Tek Screws) →
AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company: its self-drilling screws (tek screws) are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Competitive export pricing

The best price on self-drilling screws (tek screws) for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for self-drilling screws (tek screws) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Self-drilling screws are made in very large runs, so roofing and cladding lots ship at wholesale rates, and the drill point, head, washer and coating can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

About us

Trusted Self-Drilling Screws (Tek Screws) manufacturer, supplier and exporter from India

Global Fasteners Exports is a trading and export company that supplies self-drilling screws (tek screws) from India, with quality checks, export packing and complete shipping documents.

Our self-drilling screws (tek screws) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for self-drilling screws (tek screws) and for the other screws you need, one inspection and one set of export documents.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in India

Our vision is to make sourcing self-drilling screws (tek screws) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in India

Our mission is to supply self-drilling screws (tek screws) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.

Ready to order Self-Drilling Screws (Tek Screws)?

Send your quantities, grade, standard, and destination port for a quote.