Screws
Self-Drilling Screws (Tek Screws) Exporter
We export self-drilling screws (tek screws) worldwide, handling customs documentation, HS code classification, and FOB/CIF/CFR shipping terms end-to-end.
As an exporter, our job is the paperwork and logistics that make international trade actually work: HS code classification, commercial invoicing, certificates of origin, and container booking under your preferred Incoterm — so the product clears customs and arrives without delay.
Buyers evaluating us specifically in the exporter role are usually less concerned with manufacturing detail and more concerned with whether the shipment will clear customs smoothly and arrive on schedule — which is why documentation accuracy and Incoterm clarity matter as much here as the product specification itself.
A self-drilling screw replaces three steps, drilling, tapping and fastening, with one. The tip drills the hole, the flutes clear the swarf, and the thread then forms its own mating thread as the screw sinks in. The speed this saves on a large roof is the reason the type has become the default for steel sheeting.

Competitive export pricing
The best price on self-drilling screws (tek screws) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for self-drilling screws (tek screws) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Self-drilling screws are made in very large runs, so roofing and cladding lots ship at wholesale rates, and the drill point, head, washer and coating can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
750,000-1.5 million pcs
Full container (20ft)
1.5-3 million pcs
A standard 20ft container (~20 tons) typically holds 1,500,000-3,000,000 pieces of self-drilling screws in common sizes (4.8 mm x 25 mm to 5.5 mm x 38 mm). Exact quantity depends on length and washer type and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Specifications
Standards
DIN 7504 (self-drilling tapping screws), ISO 15480 (hex washer head), ISO 15481 to 15483 (pan and other heads), SAE J78 (US).
Size range
3.5 mm to 6.3 mm diameter (#6 to #14) by 13 mm to 250 mm; lengths to suit panel and purlin thickness.
Drill point
Point numbers 1 to 5: the higher the number, the thicker the steel the screw can drill; the supplier's drilling-capacity table applies.
Finish
Zinc plated, corrosion-coated (long-life grades for roofing), and stainless steel caps for coastal sites; bonded EPDM washers.
Applications
Metal roofing and cladding
Fixing profiled steel and aluminium sheets to purlins and rails, with a sealing washer.
Light steel framing
Joining studs, tracks and brackets in steel-frame buildings.
HVAC and ducting
Fixing duct work, brackets and cable trays to thin steel.
Warehouse and shed building
High-volume fixing of sheeting and trims in industrial construction.
Materials Available
Steel
Corrosion-resistant
Sealing
Every batch can be released against DIN 7504 or ISO 15480, including point drilling capacity, hardness, thread and a salt-spray result on the coating, with mill test certificates and dimensional inspection reports supplied on request.
Our Process
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the self-drilling screws (tek screws), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
Wire is cold-headed, the drill point is formed to the required number, the thread is rolled and the screws are case hardened and coated; the point geometry is checked in process.
- 3
Quality inspection
Batch sampling for drilling test on sample steel, hardness, thread, head and washer fit, and coating thickness, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of self-drilling screws (tek screws), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Countries We Cover
Frequently Asked Questions
Related Products
Get a quote — Self-Drilling Screws (Tek Screws) Exporter
Send your product list, quantities, and destination port for a quote within 1-2 business days.

