Screws
Thumb Screws (Knurled Screws) Manufacturer, Wholesaler, Supplier & Exporter
Thumb Screws (Knurled Screws) manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our thumb screws (knurled screws) are made to DIN 464, DIN 653, DIN 465 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.
A thumb screw has a large knurled head that can be turned with the fingers, so a panel or fixture can be adjusted without a tool. They are used on instruments, machine guards, enclosures and test equipment. Our partner factories make thumb screws to DIN 464 and DIN 653 in steel, stainless steel and brass, and we export them in bulk cartons.
A thumb screw trades torque for convenience. The knurled head gives the fingers a surface to grip, so a person can fit or remove a part in seconds, which suits anything that is adjusted or opened often.
The head height is the main choice. A tall DIN 464 head gives more leverage and an easier grip, while a low DIN 653 head sits flat and takes less space but is harder to turn. The knurl pattern also matters: a clean, sharp knurl grips better and does not wear the fingers.
For export orders, the buyers are mostly electronics, instrument and machine-guard makers. They need consistent head size and thread quality across thousands of pieces, and finishes such as nickel or black oxide for appearance, so we confirm those points before production.

Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
400,000-800,000 pcs
Full container (20ft)
800,000-1.6 million pcs
A standard 20ft container (~20 tons) holds approximately 800,000-1,600,000 pieces of thumb screws in common sizes (M6-M8). Exact quantity depends on size and head type and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Thumb Screws (Knurled Screws): photos by size and detail



Specifications
Standards
DIN 464 (knurled thumb screws, high type), DIN 653 (low type), DIN 465 (slotted high type), and ISO thread tolerances.
Size range
M3 to M10 in metric; #4 to 3/8" in imperial; lengths 6 mm to 60 mm.
Head forms
High knurled head, low knurled head, slotted knurled head, and wing or plastic-grip versions.
Finish
Zinc plated, nickel plated, black oxide, polished brass and stainless steel A2.
Applications
Electronic enclosures and instruments
Hand-adjusted panels, covers and feet.
Machine guards and fixtures
Quick-release screws on guards and jigs.
Laboratory and medical equipment
Stainless knurled screws that can be cleaned.
Audio and photographic gear
Clamps and mounts adjusted by hand.
Materials Available
Steel
Corrosion-resistant
Non-ferrous
Every batch can be released against DIN 464 or DIN 653, including head diameter, knurl pattern and thread tolerance, with a thread-gauge check, with mill test certificates and dimensional inspection reports supplied on request.
How We Supply & Export This Product
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the thumb screws (knurled screws), and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The head is turned or cold-formed, the knurl is rolled, the thread is rolled or cut, and the screw is plated or polished; the knurl and head height are checked in process.
- 3
Quality inspection
Batch sampling for head dimensions, knurl quality, thread gauge and finish, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of thumb screws (knurled screws), container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
Export Track Record
Shipped as full container loads (FCL) and LCL pallets of thumb screws (knurled screws) to distributors, OEM buyers and project contractors across multiple continents.
Real-World Use Cases
Instrument covers
Knurled screws holding a panel that is removed for service.
Guard adjustment
Hand-set guards on machines that change tooling.
Photographic mounts
Clamp screws on tripods and camera mounts.
Clean-room and lab fixtures
Stainless thumb screws on equipment that is cleaned often.
Common Mistakes Buyers Make
Using them for high clamp loads
Finger torque is low and the head can strip; use a screw with a drive.
Low head where fingers cannot reach
A DIN 653 head is hard to turn in tight spaces; choose DIN 464 when grip matters.
Brass in a high-wear joint
The soft thread wears out after many cycles; use steel or stainless.
Ignoring the finish
Plain steel rusts on a lab or outdoor fixture; specify stainless or plating.
Glossary of Terms
- Knurl
- A pattern of fine ridges rolled or cut into a surface to improve grip.
- DIN 464
- The German standard for high-type knurled thumb screws.
- DIN 653
- The German standard for low-type knurled thumb screws.
- Finger tight
- The light torque a person can apply by hand.
- Free-cutting steel
- A steel that machines easily, often used for turned screws.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Thumb Screws (Knurled Screws) To
All countries and cities for Thumb Screws (Knurled Screws) →Frequently Asked Questions
Related Products
Competitive export pricing
The best price on thumb screws (knurled screws) for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for thumb screws (knurled screws) for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Thumb screws are made in repeat batches, so a container of mixed sizes keeps the rate down, and head height, knurl, material and plating can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
About us
Trusted Thumb Screws (Knurled Screws) manufacturer, supplier and exporter from India
Global Fasteners Exports is a trading and export company that supplies thumb screws (knurled screws) from India, with quality checks, export packing and complete shipping documents.
Our thumb screws (knurled screws) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for thumb screws (knurled screws) and for the other screws you need, one inspection and one set of export documents.
16+
Years of experience
40+
Our team
10,000+
Happy customers
41
Fastener product lines
222
Countries we supply
FCL · LCL
Container export, door-to-port
Our vision in India
Our vision is to make sourcing thumb screws (knurled screws) simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.
Our mission in India
Our mission is to supply thumb screws (knurled screws) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.
Ready to order Thumb Screws (Knurled Screws)?
Send your quantities, grade, standard, and destination port for a quote.

