Global Fasteners ExportsHurain Engitech & Trade

Nuts

Wing Nuts Manufacturer, Wholesaler, Supplier & Exporter

Wing Nuts manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our wing nuts are made to DIN 315, ASME B18.6.9 standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

A wing nut has two flat wings that let it be tightened and released by hand, so no tool is needed. They are used wherever a joint is opened often: guards, covers, shuttering, test rigs and battery terminals. Our partner factories make wing nuts to DIN 315 and ASME B18.6.9 in steel, stainless steel and brass, and we export them in bulk cartons.

A wing nut is a trade-off: speed for strength. The wings let a person tighten it by hand in seconds, but the torque a hand can apply is a fraction of what a wrench gives. The nut is therefore chosen for joints that are opened often and do not carry a high preload.

The forming method sets the quality. A cold-forged wing nut has a solid body and thick wings that do not bend, while a stamped sheet-steel version is lighter and cheaper but its wings can flex. Die-cast zinc sits between them. We confirm the type before quoting, because the same size can be three different parts.

For markets that use both German and American forms, the order should name the standard. The wing shape changes the grip and the look, and a buyer who has been using DIN 315 will notice the difference if an ASME type arrives.

Wing Nuts manufacturer, supplier and exporter from India: studio product photo (representative photo)

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

450,000-1 million pcs

Full container (20ft)

900,000-2 million pcs

A standard 20ft container (~20 tons) holds approximately 900,000-2,000,000 pieces of wing nuts in common sizes (M6-M8). Exact quantity depends on size and forming and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Wing Nuts: photos by size and detail

Wing Nuts wholesaler and exporter: range of sizes laid out side by side (representative photo)
Buy wing nuts in bulk from India: close-up detail (representative photo)
Wing Nuts packed for export: assorted sizes in one lot (representative photo)

Specifications

Standards

DIN 315 (German form, cold forged), ASME B18.6.9 (American types A to D), ISO and BIS thread standards for the bore.

Size range

M3 to M16 in metric; #6 to 5/8" in imperial.

Forming

Cold-forged (strongest), die-cast zinc and stamped sheet-steel types for light duty.

Finish

Zinc plated, hot-dip galvanized, plain, nickel plated, with stainless steel A2 and brass versions.

Applications

Guards and covers

Machine guards and access covers that are removed often.

Formwork and scaffolding clips

Quick-release fixings in construction temporary works.

Electronics and test equipment

Terminals and panels adjusted by hand.

Solar and camping equipment

Tool-free clamps and frames.

Materials Available

Steel

Low-carbon steel, cold forgedZinc die-cast (light duty)

Corrosion-resistant

Stainless steel A2 (304)Stainless steel A4 (316)

Non-ferrous

BrassNickel plated brass

Every batch can be released against DIN 315 or ASME B18.6.9, including wing and thread dimensions, with a thread-gauge check and a torque test, with mill test certificates and dimensional inspection reports supplied on request.

How We Supply & Export This Product

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the wing nuts, and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    The nut blank is cold-forged with its wings, the thread is tapped, and the nuts are plated; wing form and thread are checked in process.

  3. 3

    Quality inspection

    Batch sampling for thread gauge, wing dimensions, finish and a hand-torque check, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of wing nuts, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

Export Track Record

Shipped as full container loads (FCL) and LCL pallets of wing nuts to distributors, OEM buyers and project contractors across multiple continents.

Real-World Use Cases

Machine guards

Covers removed for daily cleaning, fixed with a wing nut on a stud.

Battery terminals

Brass wing nuts on terminals that are opened in the field.

Test benches

Fixtures that are re-set between test runs.

Temporary works

Quick-release clips on shuttering and signs.

Common Mistakes Buyers Make

Using a wing nut where a defined preload is needed

Hand tightening cannot reach a controlled torque; use a hex nut and a torque tool.

Choosing a stamped nut for a heavy-use joint

The thin wings bend after repeated use.

Ignoring the standard

DIN and ASME forms differ in wing shape and are not interchangeable in a fixture designed for one.

Plain steel outdoors

Wing nuts rust fast in damp air; specify zinc, galvanized or stainless.

Glossary of Terms

Wing
The flat tab on the nut that is gripped by the fingers.
Cold forged
Formed from wire at room temperature, giving a strong body with a continuous grain.
DIN 315
The German standard for wing nuts in the long, flat German form.
ASME B18.6.9
The American standard for wing nuts, with types A to D by manufacturing method.
Finger tight
The light preload that a person can apply by hand, well below a wrench-tightened joint.

Quality Inspection We Perform

Dimensional inspection

Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.

Material verification

Grade and material composition confirmed against the order specification, with mill test certificates on request.

Mechanical testing

Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.

Finish & coating check

Plating thickness, galvanizing coverage, or passivation quality inspected before packing.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Countries We Export Wing Nuts To

All countries and cities for Wing Nuts →
AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company: its wing nuts are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Competitive export pricing

The best price on wing nuts for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for wing nuts for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Wing nuts are made in volume across the German and American forms, so mixed sizes still ship at bulk rates, and form, finish and material can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

About us

Trusted Wing Nuts manufacturer, supplier and exporter from India

Global Fasteners Exports is a trading and export company that supplies wing nuts from India, with quality checks, export packing and complete shipping documents.

Our wing nuts are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for wing nuts and for the other nuts you need, one inspection and one set of export documents.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in India

Our vision is to make sourcing wing nuts simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in India

Our mission is to supply wing nuts at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.

Ready to order Wing Nuts?

Send your quantities, grade, standard, and destination port for a quote.