Rods & Studs
Threaded Rods & Studs Supplier
As a supplier of threaded rods & studs, we hold ready stock across common sizes and grades for fast turnaround on repeat and project orders.
As a supplier, we act as your ongoing sourcing partner — whether that means matching an existing specification, filling a recurring order schedule, or sourcing a specific grade or finish you can't get reliably elsewhere.
This role suits buyers who've already settled on a specification and need a dependable source for it over time, rather than re-evaluating quality and pricing on every order — the relationship is built around consistency against an agreed baseline.
A threaded rod is essentially raw material for a custom-length fastening solution, which is exactly its appeal and its risk: because it can be cut to any length, buyers sometimes under-specify the grade, assuming 'threaded rod' is a commodity item interchangeable across applications. An ASTM A193 B7 stud bolt cut from certified bar stock for a pressure-boundary flange joint is a fundamentally different product from hardware-store threaded rod, even when both present the same thread pitch.
Competitive export pricing
The best price on threaded rods & studs for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for threaded rods & studs for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Threaded rods and studs are priced on bar weight, so buying standard lengths in bulk lowers the cost, and grade, cut length, coating and thread can be customized. Minimum order 5,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
5,000 pcs
Minimum order, or half / full container
Minimum order and container quantity
Minimum order
5,000 pcs
or half / full container, as per your requirement
Half container (20ft)
90,000-125,000 pcs
Full container (20ft)
180,000-250,000 pcs
A standard 20ft container (~20 tons) holds approximately 180,000-250,000 pieces of 1-metre threaded rod in common sizes (M10-M12) — fewer for longer lengths or larger diameters. Exact quantity depends on length and grade and is confirmed at quote time.
The minimum order is 5,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Specifications
Standards
DIN 975, DIN 976, ASTM A193 (B7, B8, B8M), ASTM A320.
Size range
M6 to M100 metric; up to 6 meters standard bar length, custom cut lengths available.
Types
Fully threaded rod, double-end stud (tap end), continuous-thread stud bolts.
Finish
Plain, zinc plated, hot-dip galvanized, or stainless steel.
Applications
Flange & pressure-vessel bolting
ASTM A193 stud bolts for high-temperature, high-pressure flange joints.
Structural & suspension systems
Threaded rod for hanging ductwork, cable trays, and suspended ceilings.
Concrete anchoring
Threaded rod used with chemical anchors for post-installed fastening.
General fabrication
Custom-length fastening wherever a standard bolt length won't fit.
Materials Available
Steel
Corrosion-resistant
Tensile and hardness testing performed per ASTM A193/A320 for pressure-boundary applications, with mill certificates supplied.
Our Process
- 1
Spec confirmation
Confirm grade, diameter, length, and thread type (coarse/fine).
- 2
Bar cutting & threading
Precision cutting to length followed by thread rolling along the full length or ends.
- 3
Heat treatment
Quench and temper for ASTM A193 B7 and similar high-strength grades.
- 4
Export packing
Bundled with matching nuts and washers, export-documented for project shipments.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Countries We Cover
Frequently Asked Questions
Related Products
Get a quote — Threaded Rods & Studs Supplier
Send your product list, quantities, and destination port for a quote within 1-2 business days.