Global Fasteners ExportsHurain Engitech & Trade

Anchors

Sleeve Anchors and Drop-In Anchors Manufacturer, Wholesaler, Supplier & Exporter

Sleeve Anchors and Drop-In Anchors manufacturer, wholesaler, supplier and exporter from India. Global Fasteners Exports is a trading and export company: our sleeve anchors and drop-in anchors are made to DIN, ISO and ASTM standards by partner factories and supplied to importers, distributors and OEMs in 222+ countries from 5,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

A sleeve anchor is an expansion anchor with a steel sleeve around a bolt. As the nut is tightened the sleeve expands against the walls of a drilled hole in concrete, brick or block. A drop-in anchor is an internally threaded version that is set with a tool, to take a bolt or rod. Our partner factories make both in zinc plated, galvanized and stainless steel.

A sleeve anchor works by friction. Tightening the nut pulls a cone into the sleeve, which expands against the wall of the hole along its whole length. Because the load is spread over a long length, the anchor suits softer base materials such as brick and hollow block better than a wedge anchor, which concentrates its force at the clip.

Performance depends on the hole and the installation. The hole diameter, depth and cleanliness, the edge distance and spacing, and the tightening torque all affect the load. Anchors set too close to an edge can split the concrete, and anchors set in cracked concrete have lower capacity, so designers use values for the right condition.

For projects that need approval, buyers specify the approval and the test report. We supply sleeve anchors and drop-in anchors with material certificates and the test data available for the product, and we confirm the finish for the environment: galvanized outdoors and stainless in corrosive or marine sites.

Sleeve Anchors and Drop-In Anchors manufacturer, supplier and exporter from India: studio product photo

Minimum order and container quantity

Minimum order

5,000 pcs

or half / full container, as per your requirement

Half container (20ft)

200,000-400,000 pcs

Full container (20ft)

400,000-800,000 pcs

A standard 20ft container (~20 tons) holds approximately 400,000-800,000 pieces of sleeve anchors in common sizes (M8-M10). Exact quantity depends on size and length and is confirmed at quote time.

The minimum order is 5,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Sleeve Anchors and Drop-In Anchors: photos by size and detail

Sleeve Anchors and Drop-In Anchors wholesaler and exporter: range of sizes laid out side by side (representative photo)
Buy sleeve anchors and drop-in anchors in bulk from India: close-up detail (representative photo)
Sleeve Anchors and Drop-In Anchors packed for export: assorted sizes in one lot (representative photo)

Specifications

Standards

Product testing to ICC-ES AC193 and European assessment practice (EAD 330232-00-0601 for torque-controlled expansion anchors); to the buyer's specification.

Size range

M6 to M20 in metric; 1/4" to 3/4" in imperial; lengths 40 mm to 250 mm.

Types

Hex head, flat (countersunk) head and round head sleeve anchors; internally threaded drop-in anchors with setting tool.

Finish

Zinc plated (indoor), hot-dip galvanized (outdoor), and stainless steel A2 / A4 for corrosive sites.

Applications

Structural brackets

Fixing steel brackets and base plates to concrete.

Handrails and barriers

Fixing posts and rails to walls and floors.

Services and pipe supports

Pipe clamps, trays and hangers on concrete soffits (drop-in).

Brick and block fixings

Fixing frames and fittings where concrete screws are not approved.

Materials Available

Steel

Carbon steel bolt with a steel sleeveClass 5.8 / 8.8 bolt on request

Corrosion-resistant

Stainless steel A2 (304)Stainless steel A4 (316)

Coatings

Zinc platedHot-dip galvanized

Every batch can be released against the buyer's specification and approval requirements, including sleeve and bolt dimensions, expansion test and tension and shear load tests on a sample, with mill test certificates and dimensional inspection reports supplied on request.

How We Supply & Export This Product

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the sleeve anchors and drop-in anchors, and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    The bolt, expansion cone and sleeve are made and assembled, then plated or galvanized; the sleeve length and cone angle are checked in process.

  3. 3

    Quality inspection

    Batch sampling for dimensions, expansion function, thread and coating, with a pull-out test on a sample, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of sleeve anchors and drop-in anchors, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

Export Track Record

Shipped as full container loads (FCL) and LCL pallets of sleeve anchors and drop-in anchors to distributors, OEM buyers and project contractors across multiple continents.

Real-World Use Cases

Handrail posts

Sleeve anchors fixing base plates to a concrete floor.

Steel frame brackets

Anchors holding brackets to walls.

Pipe and duct hangers

Drop-in anchors in a concrete ceiling with threaded rod.

Brick wall fittings

Frames and fittings fixed into solid brick.

Common Mistakes Buyers Make

Insufficient embedment

The anchor pulls out as a cone of concrete; use the depth in the tables.

Anchoring too close to an edge

The concrete splits; keep to the edge distance and spacing.

Over-tightening

The bolt or sleeve is overstressed; use the specified torque.

Dust left in the hole

Dust stops the sleeve gripping and lowers the load; clean the hole with a brush and blower.

Glossary of Terms

Expansion anchor
An anchor that grips the hole wall by expanding when tightened.
Sleeve
The steel tube that expands against the walls of the drilled hole.
Drop-in anchor
An internally threaded expansion anchor set with a tool.
Edge distance
The distance from the anchor centre to the nearest free edge of the base material.
Cone failure
A failure where a cone of concrete is pulled out around the anchor.

Quality Inspection We Perform

Dimensional inspection

Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.

Material verification

Grade and material composition confirmed against the order specification, with mill test certificates on request.

Mechanical testing

Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.

Finish & coating check

Plating thickness, galvanizing coverage, or passivation quality inspected before packing.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Countries We Export Sleeve Anchors and Drop-In Anchors To

All countries and cities for Sleeve Anchors and Drop-In Anchors →
AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company: its sleeve anchors and drop-in anchors are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Competitive export pricing

The best price on sleeve anchors and drop-in anchors for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for sleeve anchors and drop-in anchors for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Sleeve anchors are bought by project, so a full schedule at one price saves money, and size, head type, finish and drop-in versions can be customized. Minimum order 5,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 5,000 pcs

    Minimum order, or half / full container

About us

Trusted Sleeve Anchors and Drop-In Anchors manufacturer, supplier and exporter from India

Global Fasteners Exports is a trading and export company that supplies sleeve anchors and drop-in anchors from India, with quality checks, export packing and complete shipping documents.

Our sleeve anchors and drop-in anchors are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to importers, distributors, OEMs and project buyers. Buying through us means one supplier for sleeve anchors and drop-in anchors and for the other anchors you need, one inspection and one set of export documents.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in India

Our vision is to make sourcing sleeve anchors and drop-in anchors simple and dependable for every buyer in India and abroad: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in India

Our mission is to supply sleeve anchors and drop-in anchors at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery from India. Send your specification and quantity to get a price you can compare.

Ready to order Sleeve Anchors and Drop-In Anchors?

Send your quantities, grade, standard, and destination port for a quote.