Anchors
Sleeve Anchors and Drop-In Anchors Exporter
We export sleeve anchors and drop-in anchors worldwide, handling customs documentation, HS code classification, and FOB/CIF/CFR shipping terms end-to-end.
As an exporter, our job is the paperwork and logistics that make international trade actually work: HS code classification, commercial invoicing, certificates of origin, and container booking under your preferred Incoterm — so the product clears customs and arrives without delay.
Buyers evaluating us specifically in the exporter role are usually less concerned with manufacturing detail and more concerned with whether the shipment will clear customs smoothly and arrive on schedule — which is why documentation accuracy and Incoterm clarity matter as much here as the product specification itself.
A sleeve anchor works by friction. Tightening the nut pulls a cone into the sleeve, which expands against the wall of the hole along its whole length. Because the load is spread over a long length, the anchor suits softer base materials such as brick and hollow block better than a wedge anchor, which concentrates its force at the clip.

Competitive export pricing
The best price on sleeve anchors and drop-in anchors for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for sleeve anchors and drop-in anchors for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Sleeve anchors are bought by project, so a full schedule at one price saves money, and size, head type, finish and drop-in versions can be customized. Minimum order 5,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
5,000 pcs
Minimum order, or half / full container
Minimum order and container quantity
Minimum order
5,000 pcs
or half / full container, as per your requirement
Half container (20ft)
200,000-400,000 pcs
Full container (20ft)
400,000-800,000 pcs
A standard 20ft container (~20 tons) holds approximately 400,000-800,000 pieces of sleeve anchors in common sizes (M8-M10). Exact quantity depends on size and length and is confirmed at quote time.
The minimum order is 5,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Specifications
Standards
Product testing to ICC-ES AC193 and European assessment practice (EAD 330232-00-0601 for torque-controlled expansion anchors); to the buyer's specification.
Size range
M6 to M20 in metric; 1/4" to 3/4" in imperial; lengths 40 mm to 250 mm.
Types
Hex head, flat (countersunk) head and round head sleeve anchors; internally threaded drop-in anchors with setting tool.
Finish
Zinc plated (indoor), hot-dip galvanized (outdoor), and stainless steel A2 / A4 for corrosive sites.
Applications
Structural brackets
Fixing steel brackets and base plates to concrete.
Handrails and barriers
Fixing posts and rails to walls and floors.
Services and pipe supports
Pipe clamps, trays and hangers on concrete soffits (drop-in).
Brick and block fixings
Fixing frames and fittings where concrete screws are not approved.
Materials Available
Steel
Corrosion-resistant
Coatings
Every batch can be released against the buyer's specification and approval requirements, including sleeve and bolt dimensions, expansion test and tension and shear load tests on a sample, with mill test certificates and dimensional inspection reports supplied on request.
Our Process
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the sleeve anchors and drop-in anchors, and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The bolt, expansion cone and sleeve are made and assembled, then plated or galvanized; the sleeve length and cone angle are checked in process.
- 3
Quality inspection
Batch sampling for dimensions, expansion function, thread and coating, with a pull-out test on a sample, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of sleeve anchors and drop-in anchors, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Countries We Cover
Frequently Asked Questions
Related Products
Get a quote — Sleeve Anchors and Drop-In Anchors Exporter
Send your product list, quantities, and destination port for a quote within 1-2 business days.

