Global Fasteners ExportsHurain Engitech & Trade

Middle East · Kuwait

Thumb Screws (Knurled Screws) Manufacturer, Wholesaler, Supplier & Exporter to Mina Al Ahmadi

Thumb Screws (Knurled Screws) manufacturer, wholesaler, supplier and exporter in Mina Al Ahmadi, Kuwait. Global Fasteners Exports is a trading and export company: our thumb screws (knurled screws) are made to DIN 464, DIN 653, DIN 465 standards by partner factories and supplied to buyers in Mina Al Ahmadi, Kuwait from 10,000 pcs, or a half or full container, at competitive prices below the average wholesale price.

Thumb Screws (Knurled Screws) supplier in Mina Al Ahmadi, Kuwait: studio product photo (representative photo)

A thumb screw has a large knurled head that can be turned with the fingers, so a panel or fixture can be adjusted without a tool. They are used on instruments, machine guards, enclosures and test equipment. Our partner factories make thumb screws to DIN 464 and DIN 653 in steel, stainless steel and brass, and we export them in bulk cartons. Mina Al Ahmadi: Refinery and crude-oil export terminal south of the capital.

Mina Al Ahmadi, Kuwait at a glance

Region
Middle East
Local currency
Kuwaiti dinar (KWD)
Languages
Arabic
Time zone
Asia/Kuwait (UTC+03:00), 2 h 30 min behind India
Import taxes & duties
GCC customs duty
Indicative sea transit from India
about 4–12 days

Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.

Specifying Thumb Screws (Knurled Screws) for Mina Al Ahmadi, Kuwait

Standards we supply thumb screws (knurled screws) to
DIN 464 (knurled thumb screws, high type), DIN 653 (low type), DIN 465 (slotted high type), and ISO thread tolerances.
What Kuwait buyers commonly name
ISO, DIN, ASTM and BS specifications, with project specifications often written to ASTM for structural and oil-and-gas work
Sizing and threads
Metric for most buyers, with imperial sizes in oil, gas and legacy plant
Coating and material for the climate
Heat, coastal humidity and salt-laden air favour heavy hot-dip galvanizing or 316 stainless
Paperwork that commonly comes up
Gulf conformity schemes (GSO) and national marks can apply, with mill certificates and certificates of origin usually legalised.

General guidance for the region, not a legal requirement list. Standards, schemes and duties change, so your importer or customs broker confirms what applies to your shipment.

Mina Al Ahmadi Shipping Notes

  • • Containers for Mina Al Ahmadi discharge at Shuaiba Port and continue inland by road or rail to Mina Al Ahmadi.
  • • Main fastener-buying sectors in Mina Al Ahmadi: oil, gas & petrochemicals, port, shipping & marine, chemical & process plants.
  • • Every lot ships with mill test certificates (EN 10204 3.1), packing list and certificate of origin for customs in Kuwait.

Why Thumb Screws (Knurled Screws) Are in Demand in Mina Al Ahmadi

  • ▸Distributors and project buyers in Mina Al Ahmadi import thumb screws (knurled screws) for construction, maintenance and resale.

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

400,000-800,000 pcs

Full container (20ft)

800,000-1.6 million pcs

A standard 20ft container (~20 tons) holds approximately 800,000-1,600,000 pieces of thumb screws in common sizes (M6-M8). Exact quantity depends on size and head type and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Thumb Screws (Knurled Screws) for buyers in Mina Al Ahmadi, Kuwait

Thumb Screws (Knurled Screws) exporter to Mina Al Ahmadi from India: range of sizes laid out side by side
Buy thumb screws (knurled screws) in Mina Al Ahmadi: close-up detail (representative photo)
Thumb Screws (Knurled Screws) wholesaler for Mina Al Ahmadi buyers: assorted sizes in one lot (representative photo)

Where Mina Al Ahmadi Buyers Use Thumb Screws (Knurled Screws)

Instrument covers

Knurled screws holding a panel that is removed for service.

Guard adjustment

Hand-set guards on machines that change tooling.

Photographic mounts

Clamp screws on tripods and camera mounts.

Clean-room and lab fixtures

Stainless thumb screws on equipment that is cleaned often.

Common buying mistakes and key terms for thumb screws (knurled screws) are covered on the Thumb Screws (Knurled Screws) product page.

How Ordering Works

  1. 1

    Send your requirement

    Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).

  2. 2

    Receive a quote

    We confirm price and lead time based on ready stock or manufacturing time. Minimum order is 10,000 pcs, or a half or full container as per your requirement.

  3. 3

    Sample & confirm (optional)

    For new buyers, we can arrange samples before the full order is confirmed.

  4. 4

    Production, QC & shipping

    Manufacturing or sourcing, batch inspection, export documentation, and container loading.

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Packaging & Export Labeling

Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.

Frequently Asked Questions

Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company that supplies thumb screws (knurled screws), made by partner factories, to buyers in Mina Al Ahmadi, Kuwait. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Thumb Screws (Knurled Screws) in Other Kuwait Cities

Product Range

All 41 fastener categories we supply to Mina Al Ahmadi, Kuwait

Hex Bolts in KuwaitHex Nuts in KuwaitMachine Screws in KuwaitSelf-Tapping Screws in Mina Al AhmadiSocket Head Cap Screws in Mina Al AhmadiCarriage Bolts in Mina Al AhmadiAnchor Bolts in Mina Al AhmadiU-Bolts & J-Bolts in Mina Al AhmadiEye Bolts in Mina Al AhmadiNylon Insert Lock Nuts in Mina Al AhmadiFlange Bolts & Flange Nuts in Mina Al AhmadiFlat, Spring & Lock Washers in KuwaitBlind Rivets & Solid Rivets in Mina Al AhmadiThreaded Rods & Studs in Mina Al AhmadiWood Screws & Drywall Screws in Mina Al AhmadiSheet Metal Screws in Mina Al AhmadiSet Screws / Grub Screws in Mina Al AhmadiDowel Pins & Cotter Pins in Mina Al AhmadiCirclips & Retaining Rings in Mina Al AhmadiWedge Anchors & Chemical Anchors in Mina Al AhmadiTurnbuckles & Threaded Inserts in Mina Al AhmadiHigh-Tensile Structural Bolts in Mina Al AhmadiStainless Steel Fasteners in Mina Al AhmadiBrass Fasteners in Mina Al AhmadiRailway Track Fasteners in Mina Al AhmadiCustom & Precision Turned Components in Mina Al AhmadiLag Screws (Lag Bolts) in KuwaitDrywall Screws in Mina Al AhmadiSelf-Drilling Screws (Tek Screws) in Mina Al AhmadiDecking Screws in Mina Al AhmadiWing Nuts in Mina Al AhmadiCap Nuts (Dome and Acorn Nuts) in Mina Al AhmadiCoupling Nuts (Long Nuts) in Mina Al AhmadiCastle Nuts (Castellated Nuts) in Mina Al AhmadiWeld Nuts in Mina Al AhmadiT-Bolts (T-Head and Hammer Head Bolts) in KuwaitSpring Pins (Roll Pins) in Mina Al AhmadiThumb Screws (Knurled Screws) in Mina Al AhmadiEye Nuts (Lifting Eye Nuts) in Mina Al AhmadiConcrete Screws in KuwaitSleeve Anchors and Drop-In Anchors in Mina Al Ahmadi

Related Products

Looking for other products in Mina Al Ahmadi? Browse the full catalog or view the Kuwait market overview.

Competitive export pricing

The best price on thumb screws (knurled screws) for buyers in Mina Al Ahmadi, Kuwait

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for thumb screws (knurled screws) for your brand or wholesale business in Mina Al Ahmadi, Kuwait? Global Fasteners Exports is your best choice. Thumb screws are made in repeat batches, so a container of mixed sizes keeps the rate down, and head height, knurl, material and plating can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Orders for Mina Al Ahmadi, Kuwait are shipped by sea as FCL or LCL with full export documents. Indicative sea transit from India is about 4–12 days, confirmed at quote time. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

About us

Trusted Thumb Screws (Knurled Screws) manufacturer, supplier and exporter for Mina Al Ahmadi, Kuwait

Global Fasteners Exports is a trading and export company that supplies thumb screws (knurled screws) to Mina Al Ahmadi, Kuwait, with quality checks, export packing and complete shipping documents.

Our thumb screws (knurled screws) are manufactured to your grade, size and packing by our partner factories, and we sell and ship them to buyers in Mina Al Ahmadi, Kuwait. Buying through us means one supplier for thumb screws (knurled screws) and for the other screws you need, one inspection and one set of export documents for delivery to Mina Al Ahmadi, Kuwait.

  • 16+

    Years of experience

  • 40+

    Our team

  • 10,000+

    Happy customers

  • 41

    Fastener product lines

  • 222

    Countries we supply

  • FCL · LCL

    Container export, door-to-port

Our vision in Mina Al Ahmadi, Kuwait

Our vision is to make sourcing thumb screws (knurled screws) simple and dependable for every buyer in Mina Al Ahmadi, Kuwait: clear specifications, honest information about who makes the product, and a supplier that answers questions before and after the order.

Our mission in Mina Al Ahmadi, Kuwait

Our mission is to supply thumb screws (knurled screws) at competitive prices, below the average wholesale price, through our partner factories and bulk buying, with transparent quotations, inspection before dispatch and reliable delivery to Mina Al Ahmadi, Kuwait. Send your specification and quantity to get a price you can compare.

Request a Thumb Screws (Knurled Screws) quote for Mina Al Ahmadi

Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.