Anchors
Concrete Screws Manufacturer
Global Fasteners Exports is a trading and export company: its concrete screws are manufactured by partner factories, with batch testing and mill test certificates available on every order.
We are a trading and export company, and our products are manufactured by partner factories. Our role is to control quality from raw material through to finished, inspected product — cold-forging, hot-forging, or precision machining at those factories, with batch testing against whichever standard your project specifies.
This is the role that matters most when a buyer needs traceability: a heat number on a mill test certificate, dimensional inspection records, and a documented process from raw bar stock to finished, packed product. Buyers should ask to see this documentation rather than take quality claims at face value.
A concrete screw is a hard screw that is cut into the base material itself. The thread is hardened so that it can cut a mating thread in concrete as it is driven, which gives a mechanical key, without expansion forces on the hole edge. This makes it a good choice near edges and in thin sections.

Competitive export pricing
The best price on concrete screws for buyers worldwide
Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for concrete screws for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Concrete screws are produced in large volume, so wholesale pricing applies from the first order, and diameter, length, head, coating and stainless grade can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.
Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated
Factory-direct
Priced below the average wholesale rate
16+
Years of experience
222+
Countries we export to
10,000+
Customers worldwide
10,000 pcs
Minimum order, or half / full container
Minimum order and container quantity
Minimum order
10,000 pcs
or half / full container, as per your requirement
Half container (20ft)
400,000-800,000 pcs
Full container (20ft)
800,000-1.6 million pcs
A standard 20ft container (~20 tons) holds approximately 800,000-1,600,000 pieces of concrete screws in common sizes (6 mm-7.5 mm). Exact quantity depends on diameter and length and is confirmed at quote time.
The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Specifications
Standards
European technical assessment practice (EAD 332347-00-0601 for concrete screws) and buyer's specification; load tables from the manufacturer.
Size range
6 mm, 7.5 mm, 10 mm, 12 mm and 14 mm diameters by 40 mm to 250 mm.
Head types
Hex head with washer, countersunk with Torx, pan head, and internal-thread versions.
Finish
Blue or silver zinc, zinc-nickel, long-life corrosion coating, and stainless steel A4 / 410.
Applications
Frames and window fixings
Fixing door and window frames and battens to masonry.
Electrical and mechanical services
Cable trays, brackets and ducts fixed to concrete.
Racking and shelving
Light and medium loads in warehouses.
Cladding sub-frames
Fixing rails and brackets to a concrete wall.
Materials Available
Hardened steel
Corrosion-resistant
Heads
Every batch can be released against the buyer's specification and manufacturer's load tables, including hardness, thread, drill-hole size and a torque and pull-out test on a sample, with mill test certificates and dimensional inspection reports supplied on request.
Our Process
- 1
Order & spec confirmation
Confirm the standard, size, material, finish and quantity of the concrete screws, and any drawing or sample, before production begins.
- 2
Manufacturing at partner factories
The steel is cold-headed, a hardened cutting thread is rolled, and the screws are heat treated and coated; the thread profile and hardness are checked in process.
- 3
Quality inspection
Batch sampling for hardness, thread profile, head, coating and a torque-to-failure test, before packing.
- 4
Export packing & documentation
Corrosion-protected cartons and pallets of concrete screws, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Countries We Cover
Frequently Asked Questions
Related Products
Get a quote — Concrete Screws Manufacturer
Send your product list, quantities, and destination port for a quote within 1-2 business days.

