Global Fasteners ExportsHurain Engitech & Trade

Anchors

Concrete Screws Wholesaler

We wholesale concrete screws in bulk to distributors, retailers, and hardware stockists, with volume pricing and container-load (FCL/LCL) shipping options.

As a wholesaler, we hold ready stock across common sizes and grades and supply distributors, retailers, and hardware stockists at volume pricing — the buyer relationship here is about consistent supply and competitive per-unit cost at container-load quantities.

Wholesale buyers typically care more about consistent lead time and pricing stability across repeat orders than about a single one-off transaction, which is why we hold ready stock specifically for the sizes and grades that move fastest, rather than manufacturing every order from scratch.

A concrete screw is a hard screw that is cut into the base material itself. The thread is hardened so that it can cut a mating thread in concrete as it is driven, which gives a mechanical key, without expansion forces on the hole edge. This makes it a good choice near edges and in thin sections.

Concrete Screws manufacturer, supplier and exporter from India: studio product photo (representative photo)

Competitive export pricing

The best price on concrete screws for buyers worldwide

Global Fasteners Exports provides competitive export prices for worldwide customers, below the average wholesale price, because we buy in volume directly from our partner factories. With 16+ years of experience, we are honored to export to 222+ countries and to cooperate with 10,000+ customers around the world. Are you looking for concrete screws for your brand or wholesale business worldwide? Global Fasteners Exports is your best choice. Concrete screws are produced in large volume, so wholesale pricing applies from the first order, and diameter, length, head, coating and stainless grade can be customized. Minimum order 10,000 pieces, or a half container or a full container as per your requirement. Customized available.

Reviewed by Khalil Syed, Founder, Hurain Engitech & Trade · Last updated

  • Factory-direct

    Priced below the average wholesale rate

  • 16+

    Years of experience

  • 222+

    Countries we export to

  • 10,000+

    Customers worldwide

  • 10,000 pcs

    Minimum order, or half / full container

Minimum order and container quantity

Minimum order

10,000 pcs

or half / full container, as per your requirement

Half container (20ft)

400,000-800,000 pcs

Full container (20ft)

800,000-1.6 million pcs

A standard 20ft container (~20 tons) holds approximately 800,000-1,600,000 pieces of concrete screws in common sizes (6 mm-7.5 mm). Exact quantity depends on diameter and length and is confirmed at quote time.

The minimum order is 10,000 pcs, so you don't need a full container to order: half-container and smaller LCL orders are available as well. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.

Specifications

Standards

European technical assessment practice (EAD 332347-00-0601 for concrete screws) and buyer's specification; load tables from the manufacturer.

Size range

6 mm, 7.5 mm, 10 mm, 12 mm and 14 mm diameters by 40 mm to 250 mm.

Head types

Hex head with washer, countersunk with Torx, pan head, and internal-thread versions.

Finish

Blue or silver zinc, zinc-nickel, long-life corrosion coating, and stainless steel A4 / 410.

Applications

Frames and window fixings

Fixing door and window frames and battens to masonry.

Electrical and mechanical services

Cable trays, brackets and ducts fixed to concrete.

Racking and shelving

Light and medium loads in warehouses.

Cladding sub-frames

Fixing rails and brackets to a concrete wall.

Materials Available

Hardened steel

Carbon steel, case hardened with a cutting thread

Corrosion-resistant

Zinc-nickel and long-life coatingStainless steel A4 (316) or 410

Heads

Hex washer headCountersunk TorxPan head

Every batch can be released against the buyer's specification and manufacturer's load tables, including hardness, thread, drill-hole size and a torque and pull-out test on a sample, with mill test certificates and dimensional inspection reports supplied on request.

Our Process

  1. 1

    Order & spec confirmation

    Confirm the standard, size, material, finish and quantity of the concrete screws, and any drawing or sample, before production begins.

  2. 2

    Manufacturing at partner factories

    The steel is cold-headed, a hardened cutting thread is rolled, and the screws are heat treated and coated; the thread profile and hardness are checked in process.

  3. 3

    Quality inspection

    Batch sampling for hardness, thread profile, head, coating and a torque-to-failure test, before packing.

  4. 4

    Export packing & documentation

    Corrosion-protected cartons and pallets of concrete screws, container loading, and full export documents (invoice, packing list, certificate of origin, MTC).

HS Code & Customs Classification

Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.

Countries We Cover

AndorraAntigua & BarbudaAnguillaAlbaniaArmeniaAmerican SamoaArubaÅland IslandsAzerbaijanBosnia & HerzegovinaBarbadosBelgiumBurkina FasoBulgariaBurundiBermudaBruneiBoliviaBahamasBhutanBotswanaBelarusCentral African RepublicCongo - BrazzavilleCôte d’IvoireCook IslandsCameroonCosta RicaCubaCape VerdeDenmarkDominicaDominican RepublicEcuadorEstoniaEritreaFinlandFijiFalkland IslandsMicronesiaFaroe IslandsGabonGrenadaGeorgiaFrench GuianaGuernseyGibraltarGreenlandGambiaGuineaGuadeloupeEquatorial GuineaGreeceGuatemalaGuamGuinea-BissauGuyanaHong KongHondurasCroatiaHungaryIsle of ManIndiaIranIcelandJerseyJamaicaKyrgyzstanKiribatiComorosSt. Kitts & NevisNorth KoreaCayman IslandsKazakhstanLaosLebanonSt. LuciaLiechtensteinLiberiaLesothoLithuaniaLuxembourgLatviaMonacoMoldovaMontenegroMadagascarMarshall IslandsNorth MacedoniaMyanmar (Burma)MongoliaMacaoNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMozambiqueNamibiaNew CaledoniaNigerNicaraguaNorwayNepalNauruNiueFrench PolynesiaPapua New GuineaSt. Pierre & MiquelonPitcairn IslandsPuerto RicoPalestinian TerritoriesPalauParaguayRéunionSerbiaRussiaRwandaSolomon IslandsSeychellesSingaporeSt. HelenaSloveniaSlovakiaSierra LeoneSan MarinoSenegalSurinameSouth SudanSão Tomé & PríncipeEl SalvadorEswatiniTurks & Caicos IslandsChadTajikistanTimor-LesteTurkmenistanTongaTrinidad & TobagoTuvaluTanzaniaUkraineUgandaUruguayUzbekistanVatican CitySt. Vincent & GrenadinesVenezuelaBritish Virgin IslandsU.S. Virgin IslandsVanuatuWallis & FutunaSamoaYemenZimbabweAfghanistanCambodiaCyprusSyriaTaiwanAngolaBeninDjiboutiLibyaMaliSomaliaSudanTogoTunisiaUnited StatesCanadaUnited KingdomGermanyNetherlandsFranceItalySpainPolandUnited Arab EmiratesSaudi ArabiaQatarKuwaitOmanSouth AfricaNigeriaKenyaEgyptTurkeyVietnamIndonesiaMalaysiaThailandPhilippinesBangladeshSri LankaBrazilMexicoChileAustraliaNew ZealandSouth KoreaBahrainJordanIraqMoroccoAlgeriaGhanaEthiopiaZambiaColombiaPeruArgentinaRomaniaCzech RepublicAustriaSwitzerlandSwedenIrelandPortugal

Frequently Asked Questions

Yes. Global Fasteners Exports (Hurain Engitech & Trade, Palanpur), founded in 2010 by Khalil Syed, is a trading and export company that acts as concrete screws wholesaler: products are manufactured by partner factories. It ships FCL and LCL containers to DIN, ISO and ASTM standards at competitive prices below the average wholesale price. Send your specification and quantity for a quote.

Related Products

Get a quote — Concrete Screws Wholesaler

Send your product list, quantities, and destination port for a quote within 1-2 business days.